The green laser marking machine is developed with the most advanced wavelength of 532nm laser pumping technology (side pump or end pump). Customers can freely choose the pump type according to the characteristics of their products. The electro-optical conversion rate is high, which can reach 30% or more, and the power consumption of the whole machine is low, and the protection is very good.
|Average output power||3W|
|Repeat frequency range||20~30KHz|
Widely used of interior and exterior marking for glass and crystal products, such as cellphone screen, LCD screen, optical components, aotomotive glassec etc. And it can mark on the coating film on most metal and non-metal materials, such as hardware, ceramics, clocks and watches, PC, electronics, PCB board and control board etc.
1. The performance of the whole machine is stable, small in size and low in power consumption.
2. The electro-optical conversion efficiency is high and the service life is long.
3. The laser spot output is very small, and the light mode is good. It is suitable for the occasional markings such as fine graphics.
4. The beam quality is good, the output laser stability is high, and the marking effect is easy to debug.
5. Vibrating mirror type high-precision marking head, the marking effect is fine and can be repeated, and the marking speed is faster.